The Finishing Store
Search
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

Making Curly Maple Pop

Jun 21, 2016 | Expert's Corner | 0 comments

To maximize the beauty of curly maple (also bird’s eye maple), you want the curls to “pop.” That is, be significantly darker than the rest of the wood. To do this you need to get more color into the curls.

To some extent this happens naturally with any stain when you wipe off the excess. But you can significantly increase the darkness, or pop, by applying a number of coats of thinned water-soluble dye stain and sanding or scraping in between coats after each is dry.

A good choice of dye color is Honey Amber Maple from W.D. Lockwood (sold as “Moser” dyes at Woodworkers Supply). Thin the dye with up to five parts water, and apply up to five or more coats, sanding or scraping between each until you have removed all or most of the color between the curls. This way, each additional application of the dye will darken the curls and then be removed from between the curls.

Leave the last coat unsanded, and begin applying finish after this coat has dried.

You can increase the pop a little by applying a first coat of boiled linseed oil, wiping off all the excess. But you need to then allow the linseed oil to dry a week or so in a warm room before applying a film building finish. As the linseed oil ages, it will darken, intensifying the contrast of the curls.

You can apply several coats of any finish, but oil finishes won’t produce enough shine or depth to maximize the contrast you’re trying to achieve. The example of the curly maple tall clock shown is finished with shellac.