Cart 0

Expert's Corner — woodworking

TIP: How to Choose a Stain for Fade Resistance

colored dyed pigment the finishing store wood woodfinishing woodwork woodworking

Pigment resists fading. Dye fades quickly in sunlight, including sunlight coming through a window. So when staining any object that will receive direct sunlight, always use stain containing only pigment. Because pigment settles and dye doesn’t, you can easily test for pigment or dye by dipping a light colored stirring stick to the bottom of a can of stain after you have given all the pigment enough time to settle (usually a week or longer). If the upper part of the stick is colored, the stain contains dye. If you can lift solid material off the bottom of the can,...

Read more →


How to Choose a Finish: Part II

finishes heat moisture solvent stripping the finishing store tinker wood woodfinishing woodwork woodworking

How to Choose a Finish: Part II

For an overview of choosing a finish please refer to “How to Choose a Finish: Part I.” To better understand finishes and their differences, it’s very helpful to put them into categories by the way they cure. You may think the resins—polyurethane, alkyd, acrylic, etc.—make the big difference in finishes, but they don’t. Consider, for example, that polyurethane resin is used in varnish, water-based finish, two-part finish and in some lacquers. If you have used any two of these finishes, you know they are very different. The curing process the finish goes through is far more significant for understanding each...

Read more →


How to Choose a Finish: Part I

finish furniture refinishers solvent the finishing store wood woodfinishing woodwork woodworking

How to Choose a Finish: Part I

The first step in finishing a project (beyond preparing the wood, of course) is to choose the finish you want to use. In fact, it's wise to make this choice even before starting on the project because it may influence the wood you choose. There are seven broad categories of finishes to choose from: Oil and blends of oil and varnish (often called "Danish" oil) Varnish, which includes polyurethane varnish, spar varnish, wiping varnish (varnish thinned about half with mineral spirits) and gel varnish Shellac, which can be clear or amber and with its natural wax included or removed Lacquer,...

Read more →


Caring for Natural Bristle Brushes used with Water Based Paints

bleach brush brushes clean containers finish hooks shop storage the finishing store towel wood woodfinishing woodwork woodworking

Caring for Natural Bristle Brushes used with Water Based Paints

1. Always wash a new brush before you use it.  I use Dawn Liquid Detergent in the shop, but you can use most any detergent that doesn’t contain bleach.  Bleach will dry out your bristles, just like your hair. I squeeze the detergent into the palm of my hand and then carefully mash my brush bristles into the soap. Rinse with cool water. This will help remove any loose bristles before you begin to paint.  This step will prevent those pesky hairs from ending up on your canvas, chair, or trim.  Once you have washed your brush smack it on the...

Read more →


Enhance the Appearance of Wood With Stains

appearance apply coat color enhance finish stain the finishing store wood woodfinishing woodwork woodworking

Enhance the Appearance of Wood With Stains

While there are some woodworkers who might cringe at the thought of staining wood, there are good reasons why you might want to do so. Some lighter colored woods, such as poplar, alder, beech, and birch do tend to look somewhat bland, and can benefit from a dash of color. Who hasn't bought a load of wood, only to find, after milling, a disappointing variation in the color - staining can even out the tone of the wood. When building new furniture or cabinetry to match existing pieces, staining might be the only way to blend the two. And, with...

Read more →

p>