Cart 0

Expert's Corner — thinned

TIP: Two coats, minimum

coats sand sheen the finishing store thinned varnish wood woodfinishing woodwork woodworking

TIP: Two coats, minimum

It almost always takes at least two coats of any finish to develop the sheen a finish is designed to produce: gloss, satin, flat, or whatever. The first coat seals the wood. The second coat develops the sheen. The exception to the two-coat rule would be if you apply the first coat really thick. This can usually be done only on horizontal surfaces. The reason two coats are usually necessary is that a lot of the first coat soaks into the wood, so there isn’t enough build to produce the sheen. If you’re applying highly thinned coats, as shown with...

Read more →


TIP: Dye Migration

blotch darker dye grain the finishing store thinned trick water wood woodfinishing woodwork woodworking

TIP: Dye Migration

The general consensus on figured woods is pretty much saturation, or using a trace coat to further intensify the grain. However sometimes a dye can migrate, meaning it just goes way too dark and can create a blotchy mess. Broad curl woods like Curly Cherry, Flame Birch, etc. can also absorb any colorant unevenly. We've looked at many ways to help control this. I want to emphasize how important it is that you do a test on a scrap before you dive in. With that said one of my favorite tricks is to use water to help control the absorption....

Read more →


DEALING WITH THE CHERRY BLOTCHING PROBLEM

bare blotches coat dye finished glaze shellac stain thinned washcoat wet woodfinishing woods woodworking

DEALING WITH THE CHERRY BLOTCHING PROBLEM

Cherry was long thought of as the poor man’s mahogany and was used as a substitute for mahogany. But as quality mahogany has become harder to get, cherry has become increasing popular and is now widely thought of as a quality wood in its own right. Though cherry has a beautiful color and is easy to work, it is difficult to finish nicely because of its tendency to blotch. Blotching is uneven coloring caused especially by stains, but also by just a clear finish, that leaves some areas darker than others. Everyone wants to know how to avoid blotching in...

Read more →