Apollo 8200 Series Spray Guns
The Apollo 8200 Super-Spray® Gun Combines Lightning Speed Of Application With Super Fine Atomization
The Apollo 8200 Super-Spray® gun is a high performance HVLP spray gun that provides superb atomization along with high HVLP efficiency. Combine ultra-fast speed of application with our precise Xpansive™ Fan Conrtol Ring and you have the ultimate HVLP spray gun and the lowest overspray.
Handsome new design with chrome plated spray gun body. Including:
- Precision fan control through the Xpansiveâ„¢ Fan Control Ring
- New technology for atomizing particles MicroTechâ„¢ Atomization Technology
- A major advance in balance and lightweight design
- Durability and reliability ensured with internal parts expertly engineered from marine-grade stainless steel
- Enjoy low overspray and a flawless finish
- 2-Year written warranty
- Easy to use and clean-up
- Increase substrate visibility with Tri-Modeâ„¢ Gravity Feed
Tri-Modeâ„¢ = A unique design allowing you to use one spray gun with 3 different cup configurations: production, gravity, or any bottom cup.
Nozzle/Needle sizes available: 1.0mm (installed), 1.4mm, 2.0mm
Air Caps available: 1.0mm (installed), 1.4mm, 2.0mm
Spray Gun Air Requirements: 7-25psi and 4-6cfm
Models:
A8200Q Conversion Tri-Mode 1 quart cup gun Be in control with the 8200Q Super-Spray® gun. Enjoy the production benefits of the 8200 and a 1 quart (1 litre) cup assembly with cup pressure control. Ensure maximum efficiency, application speed and super fine atomization. The A8200Q Super-Spray® HVLP cup gun is supplied with a 1 quart (1 litre) non-stick coated cup assembly, cup pressure regulator/gauge, duckbill valve, sample bottle of genuine Apollo Spray Gun Lube and a wrench (spanner). |
 |
A8200 Conversion Tri-Mode production spray gun Production Spray Gun The Apollo 8200 spray gun has a 1/4" (6mm) material connector that is ready to use with any production pot or cup accessory. The 8200 production spray gun is supplied with a sample bottle of genuine Apollo Spray Gun Lube and a wrench (spanner). |
 |
A8200M Conversion Tri-Mode touch-up cup gun Perfect for that small job or changing colors frequently. Add additional cups with lids for storing different colors in the cups. The Apollo 8200M touch-up cup gun is supplied with an 8fl. oz (250cc) mini touch-up cup assembly, duckbill valve, cup pressure regulator/gauge, sample bottle of genuine Apollo Spray Gun Lube and a wrench (spanner). |
 |
A8200G Conversion Tri-Mode Gravity cup gun Ultimate gravity feed without the cup getting in your way. Tilt the cup back and forth without spilling your material. The Apollo 8200G is supplied with a 13fl. oz (400cc) side mounted stainless steel gravity cup, sample bottle of genuine Apollo Spray Gun Lube and a wrench (spanner). |
 |